Home » Hyundai Recalls Tucson Hybrid and Elantra Over Faulty Strut Fasteners

Hyundai Recalls Tucson Hybrid and Elantra Over Under-Tightened Front Strut Nuts

By

–

Hyundai Recalls Tucson Hybrid and Elantra Over Faulty Strut Fasteners

Hyundai is recalling certain Tucson Hybrid crossovers and Elantra sedans because the flange nuts on the front struts were not tightened properly on the line. Left alone, they can work loose.

The technical reality

The part is a flange nut, number 62618-4D000, supplied by South Korea’s Samjin Nut. The nut is fine. The trouble is torque: too little was applied during assembly, so the fastener can slacken with time. In a MacPherson-type front suspension the strut ties the wheel assembly to the body, locates the steering knuckle, takes lateral loads and soaks up bumps. If that joint lets go, the strut can part from neighbouring suspension components, which raises crash risk sharply at freeway speed.

Hyundai Motor America knows of no crashes or injuries tied to the condition. The case began with one field report to its North American Safety Office, from the owner of a 2026 Elantra who heard odd noises from the front end over bumps. A survey of unsold vehicles through October 5, 2026, turned up two with incorrectly tightened fasteners.

Which vehicles

Tucson Hybrid models built between January 21 and March 20, 2026, are included, along with Elantras assembled from December 30, 2025, to July 6, 2026. All came from the Ulsan complex in South Korea, billed as the world’s largest integrated car plant: six manufacturing facilities, more than 30,000 workers and over 5,000 vehicles a day.

This is a separate matter from the smaller recall of 17 vehicles, Venues and Elantras built in August 2026, for lug nut torque. That batch included one Elantra N, four hybrids and four gas-only sedans.

The fix

Dealers will check both front strut assemblies, then retighten or replace the original parts as needed. A wheel alignment follows, because disturbing strut hardware can shift the settings, and skipping it invites a pulling sensation and uneven tire wear. Everything, alignment included, is free even out of warranty.

At Ulsan, Hyundai has added better torque monitoring logic and production sign-off requirements, in effect since September 9, 2026. As ever, the detail that matters is the process that fitted the part, not the part. Owners will be sent letters by first-class mail by December 19, 2026, and VINs can be checked now on the NHTSA recall portal.

Sources

Photo: HJUdall (CC0)

Get breaking stories first on our Telegram channel.

More stories by

Most read

Automotive & EV

Betting & Gambling

Sports

World News